Standard Cmos Features - Fujitsu MS-6191 User Manual

Mainboard MS-6191

3.4 Standard CMOS Features

The items in Standard CMOS Setup Menu are divided into 10 categories. Each category includes no, one
or more than one setup items. Use the arrow keys to highlight the item and then use the <PgUp> or <PgDn> keys to select
the value you want in each item.
Date(mm:dd:yy):
Time(hh:mm:ss):
IDE Primary Master
IDE Primary Slave
IDE Secondary Master
IDE Secondary Slave
Drive A
Drive B
Video
Halt On
Based Memory
Extended Memory
Total Memory
Date
The date format is <day><month> <date> <year>.
Day
Month
Date
Year
Time
The time format is <hour> <minute> <second>.
PrimaryMaster/PrimarySlave
SecondaryMaster/Secondary Slave
Press PgUp/<+> or PgDn/<-> to select Manual, None, Auto type. Note that the specifications of your drive must
match with the drive table. The hard disk will not work properly if you enter improper information for this category. If your
hard disk drive type is not matched or listed, you can use Manual to define your own drive type manually.
If you select Manual, related information is asked to be entered to the following items. Enter the information
directly from the keyboard. This information should be provided in the documentation from your hard disk vendor or the
system manufacturer.
CMOS Setup Utility - Copyright(C) 1984-1999 Award Software
Standard CMOS Setup
Fri, Nov 19,1999
00:00:00
Press Enter 2557MB
Press Enter None
Press Enter None
Press Enter None
1.44M, 3.5in.
None
EGA/VGA
All Errors
640K
64512K
65536K
Day of the week, from Sun to Sat, determined by BIOS. Read-only.
The month from Jan. through Dec.
The date from 1 to 31 can be keyed by numeric function keys.
The year, depends on the year of the BIOS
If the controller of HDD interface is SCSI, the selection shall be "None".
If the controller of HDD interface is CD-ROM, the selection shall be "None".
Item Help
Menu Level >
38