Power Status Led - Fujitsu MS-6191 User Manual

Mainboard MS-6191

Power Status LED

This item determines which state the Power LED will use. The settings are Blinking, Dual color, and Single color.
During blinking, the power LED will blink when the system enters the suspend mode. When the mode is in Dual Color, the
power LED will change its color. Choose the single color and the power LED will always remain lit.
To operate the onboard parallel port as Standard Parallel Port only, choose "SPP." To operate the
onboard parallel port in the EPP modes simultaneously, choose "EPP." By choosing "ECP", the
onboard parallel port will operate in ECP mode only. Choosing "ECP + EPP" will allow the
onboard parallel port to support both the ECP and EPP modes simultaneously. The ECP mode has
to use the DMA channel, so choose the onboard parallel port with the ECP feature. After selecting
it, the following message will appear: "ECP Mode Use DMA" At this time, the user can choose
between DMA channels 3 or 1. The onboard parallel port is EPP Spec. compliant, so after the
user chooses the onboard parallel port with the EPP function, the following message will be
displayed on the screen: "EPP Mode Select." At this time either EPP 1.7 spec. or EPP 1.9 spec.
Can be chosen.
48