Fujitsu MS-6191 User Manual page 28

Mainboard MS-6191
2.17 Wake-Up on LAN Connector: JWOL
The JWOL connector is for use with LAN add-on cards that supports Wake Up
on LAN function. To use this function, you need to set the "Wake-Up on Lan"
to enable at the BIOS Power Management Setup.
3 1
JWOL
PIN
1
2
3
Note: LAN wake-up signal is active "high".
Note: To be able to use this function, you need a power supply that
provide enough power for this feature. (750 ma power supply with
5V Stand-by)
SIGNAL
5VSB
GND
MP_WAKEUP
28