Fujitsu M4097D Operator's Manual page 98

4 At Screen 57-2, designate the page edge
filter area through
5 Press to decrease or
value.
The increment/decrement is 1mm and the
value can be selected from 0 through 15.
Then, press to display Screen 57-3.
NOTICE
The page edge filter area is in proportion to the above set value.
6 At Screen 57-3, designate the area
through or button.
7 Press to declease or
value.
The increment/decrement is 1mm and the
value can be selected from -7 through +7.
Then, press [Enter] to display Screen 57-
4.
NOTICE
When a plus figure is designated, the area is set upward from the bottom edge of the image.
When a minus figure is designated, the area is set downward from the bottom edge of the image.
The standard value is the paper length + 3mm.
or button.
to increase the
to increase the
<Screen 57-3>
<Screen 57-4>
7-15