Fujitsu M4097D Operator's Manual page 90

4. Reset of the abrasion counter
When you reset the abrasion counter, you must set it as follows:
1 Press "Next" or "Previous"
the scanner display Screen 44.
2 At Screen 44;
If you want to reset the abrasion counter,
select "Yes" through
press . Go to procedure 3.
If you do not want to reset the abrasion
counter, select "No" and press
Finally press to return.
3 At Screen 44-1;
If you want to reset the abrasion counter,
select "Yes" and press
not want to reset it, select "No" and press
. Press to return.
5. Setting the pick start time
When you set the pick start time, you must set it as follows:
1 Press "Next" or "Previous"
the scanner display Screen 45.
2 At Screen 45, press
Pick start time or press
the Pick start time. Then press
activate the setting. Finally press
return.
and let
<Screen 44>
or button and
.
<Screen 44-1>
. If you do
and let
<Screen 45>
to increase the
to decrease
to
to
7-7