Fujitsu M4097D Operator's Manual page 96

15. Display the TPS Board ID Number
1 Press "Next" or "Previous"
the scanner display Screen 55.
The scanner displays the ID number if the
applicable board is installed.
NOTICE
If the Fujitsu video Interface Option board is installed properly, the display shows "ID=7".
2 Press to return.
16. Select Built-In/IPC-4D Image Processing
1 Press "Next" or
display the Screen 56.
2 At Screen 56, press
"Standard" or "IPC-4D".
When "Standard" is selected, the scanner
uses its built-in image processing. On the
other hand, the scanner selects the image
processing of the IPC-4D when the "IPC-4D"
is installed and selected.
NOTICE
The factory default is "Standard".
and let
and let the scanner
or to select
<Screen 55> (An Example)
<Screen 56>
7-13