Fujitsu M4097D Operator's Manual page 101

6 At Screen 58-3, designate the page edge
filter area through
7 Press to declease or
value.
The increment/decrement is 1mm and the
value can be selected from 0 through 15.
Then, press
NOTICE
When a plus figure is designated, the area is set upward from the bottom edge of the image.
When a minus figure is designated, the area is set downward from the bottom edge of the image.
The standard value is the paper length + 3mm.
8 At Screen 58-4, designate the page edge
filter area through
9 Press to declease or
value.
The increment/decrement is 1mm and the
value can be selected from 0 through 15.
Then, press
NOTICE
The page edge filter area from the left edge towards the right is in proportion to the above set value.
7-18
or button.
to increase the
to display Screen 58-4.
or button.
to increase the
to display Screen 58-5.
<Screen 58-4>
<Screen 58-5>