Fujitsu M4097D Operator's Manual page 46

Fan the sheets before setting a
2
stack of documents on the ADF
paper chute.
NOTICES
• Remove paper clips and staples. Flatten the staple holes.
• The following documents may have difficulty being fed with this scanner. To prevent unexpected
problems, conduct preliminary feed testing using the same type of paper as the yarget documents.
- Paper with clips or staples.
- Paper written on with wet ink.
- Paper of uneven thickness (for example, envelopes).
- Paper with large rumples or curls.
- Paper with folds or tears.
- Tracing paper.
- Coated paper.
- Carbon paper.
- Paper smaller than A8 (portrait) size or wider than A3 size.
- Materials other than paper (for example, clothes, sheet metal, or OHP film).
- Photographic paper.
- Paper with perforations on the side.
- Non-rectangular paper.
- Very thin paper.
Document
10mm
3-5