Fujitsu M4097D Operator's Manual page 104

20. Setting the Numbering Print Function (for fi-475PR Imprinter Option)
You can specify conditions of the numbering print function from the operator panel when the scanner is
equipped with the fi-475PR imprinter. The numbering counter increments 1 time each sheet of paper
that is read. Numbering print starts with a top margin of 42 mm.
1 Press "Next" or "Previous"
display Screen 60.
2 At Screen 60, press
"On". Press if you want to activate
the setting function. The scanner displays
Screen 60-1, indicating that the setting
function is activated.
NOTICE
When the setting function is disabled, the screen is as shown right.
3 At Screen 60-1, select the number of
digits. Press or
then press . The scanner displays
Screen 60-2.
4 At Screen 60-2, select the initial number.
Press or to move the place of the
blinking (changeable) digit and press
or to change the value, press
The scanner displays Screen 60-3.
NOTICE
The possible maximum number is 99999 (for five digits) or 16777215 (for eight digits).
to
or to select
to select "5" or "8"
.
<Screen 60>
<Screen 60-1>
<Screen 60-2>
7-21