Powerful Operation; Economy Operation - Fujitsu Inverter 9319356068 Operating Manual

POWERFUL OPERATION

The product will operate at maximum power, which is convenient when you want to quickly cool down or warm up the room.
Begin Air Conditioner operation before performing this procedure.
To use POWERFUL Operation
Press the POWERFUL button
Only as for this button operation, the beep sound is different from the others.
Powerful operation start: Beep 3 times (Pi Pi Pi !) / Others: Beep 2 times (Pi Pi !)
To stop POWERFUL Operation
Press the POWERFUL button
Normal operation begins.
About the POWERFUL Operation
Cooling/Dry ● Powerful Operation mode is automatically turned off when the room temperature has fallen to the set temperature
or when 20 minutes have passed after setting the POWERFUL Operation mode. However, it does not turn off auto-
matically within a certain time of setting the POWERFUL Operation mode.
● Powerful Operation mode is automatically turned off when the room temperature has risen to the set temperature
Heating
or when 20 minutes have passed after setting the POWERFUL Operation mode. However, it does not turn off auto-
matically within a certain time of setting the POWERFUL Operation mode.
● Wind direction and airflow rate are automatically set in POWERFUL Operation mode. Wind direction can be
changed through the wind direction adjustment button.
● POWERFUL Operation and ECONOMY Operation modes can't be set simultaneously.
The function whose button on the remote controller is last pressed will be given priority.
●
If the POWERFUL Operation is set while setting the "
will be executed after the POWERFUL Operation ends.

ECONOMY OPERATION

Begin Air Conditioner operation before performing this procedure.
To Use the ECONOMY Operation
Press the ECONOMY button
The ECONOMY indicator Lamp (green) will light.
ECONOMY operation begins.
To Stop the ECONOMY Operation
Press the ECONOMY button
The ECONOMY Indicator Lamp (green) will go out.
Normal operation begins.
About ECONOMY Operation
● When ECONOMY operation mode is operated, the room temperature will be little higher than the set-temp under cooling mode
and lower than set-temp under heating mode. Therefore, the ECONOMY mode is able to save more energy than other normal
mode.
● In case of single-type air conditioner, at the maximum output, ECONOMY operation is approximately 70% of normal air condi-
tioner operation for cooling and heating.
● In case of multi-type air conditioner, the ECONOMY operation mode is only available for the set indoor unit.
● If the room is not cooled (or heated) well during ECONOMY operation, select normal operation.
● During the monitor period in the AUTO mode, the air conditioner operation will not change to ECONOMY operation even if
ECONOMY operation is selected by pressing the ECONOMY operation button.
9319356068_OM_En.indd 10
.
again.
.
again.
" or " ", "
Indicator Lamp
OPERATION TIMER
: Lighting : OFF
" or " "
ECONOMY
En-10
4/27/2012 1:15:59 PM