HUMAN SENSOR (ENERGY SAVING)
This function automatically controls the temperature setting when there is no one in the
room for a while, and prevents electricity from being wasted.
To enable the ENERGY SAVING
ENERGY SAVING is set at the time of purchase.
Press the SENSOR button
" on the remote control will be displayed À ashing.
● ENERGY SAVING is set.
● It will be on until the ENERGY SAVING setting is turned off.
To disable the ENERGY SAVING
Press the SENSOR button
" on the remote control will be no longer displayed.
● ENERGY SAVING is turned off.
About the ENERGY SAVING Operation
If no one enters the room for approximately 20 minutes, the set temperature will be
(When someone comes back into the room, the human sensor will detect this, and
automatically revert to the original settings.)
Application range is follows.
Vertical angle 90° (Side view)
ENERGY SAVING function may not work when the room temperature is very different
from the temperature de¿ ned in temperature setting, such as when immediately after
starting the operation.
About the HUMAN SENSOR
Details about detection with the human sensor
The human sensor detects whether there are people in the room by
looking for movement by people in the room.
Since the human sensor detects infrared light given out by people, there may be cases where this detection is incorrect.
Situations in which the sensor will detect no people in the room, even when there is someone there
When the temperature is high and the difference with between people's body temperature is small.
(Such as during the summer when the temperature is 30ÛC or higher)
When there is someone in the room, but they do not move for a long period of time.
When someone is hidden behind a sofa, other furniture, glass, or in similar situations.
When someone is wearing extremely thick clothing and has their back facing the sensor.
Situations in which the sensor will incorrectly detect people in the room, even when there is no one there
When there is a dog or a cat moving around in the room.
When the wind is making curtains or plan leaves move.
When there is an oscillating electric fan operating.
(if there is no one in the room for a while)
The set temperature will be increased by a maximum of
The set temperature will be decreased by a maximum of
This runs the ENERGY SAVING function for the auto-
matically selected mode (Cooling/ Heating/ Drying).
Horizontal angle 100° (Top view)
(If ENERGY SAVING is set)
(If ENERGY SAVING is off)
When using together with the SLEEP
TIMER (P. 15), the SLEEP TIMER will
During 10°C HEAT OPERATION, if
there is no one in the room the set
temperature will not be changed.
4/27/2012 1:15:58 PM