Human Sensor For Energy Saving (For Kgtb, Kgte, Kmtb, And Kmcc Series Wall Mounted Type) - Fujitsu AUXG07KVLA Manual

7-14. Human sensor for energy saving (For KGTB, KGTE,
KMTB, and KMCC series Wall mounted type)
If no one enters the room for approximately 20 minutes, the set temperature is automatically con-
trolled. (When someone comes back into the room, the human sensor detect this, and automatically
revert to the original settings.)
Operation mode
Cool/Dry
Heat
Auto
• Application range:
Energy saving function may not work when the room temperature is very different from the tem-
perature defined in the temperature setting, such as when immediately after starting the operation.
• Details about detection with the human sensor:
The human sensor detects whether there are people in the room by looking for movement by peo-
ple in the room.
7-14. Human sensor for energy saving (For KGTB, KGTE, KMTB, and KMCC series
Wall mounted type)
(If there is no one in the room for a while)
The setting temperature is increased by maximum 2°C.
(Maximum setting temperature: 30°C)
The setting temperature is decreased by maximum 4°C.
(Minimum setting temperature: 16°C)
Energy saving function is performed automatically for the selected mode
Vertical angle 90°
6 m
90
°
Side view
- (04-82) -
Operation details
(cool/heat/dry).
Horizontal angle 100°
6 m
50 50
° °
Top view
7. Various control