Separate Installation Of Series 685 Battery Cabinets; Figure 14. Placement Of Joining Brackets (Two Or More Series 685 Battery Cabinets) - Powerware 9350 Installation Manual

Back of
Battery Cabinet #1
Screw from kit
Existing Screw
Front of
Battery Cabinet #1
NOTE: When cabinets are properly aligned, all cabinet doors

Figure 14. Placement of Joining Brackets (Two or More Series 685 Battery Cabinets)

Separate Installation of Series 685 Battery Cabinets

1.
Remove the right-hand screw from the top door hinge of battery cabinet #1.
Align the hole in one flat bracket over this screw hole, and the other hole over
the hole in the top of battery cabinet #2. Replace the screw in the hinge, and
attach the other end of the bracket by using an M4×10 hex screw from the
field kit (see Figure 14).
2.
Align the holes in the other small flat bracket with the two holes in the top rear
of battery cabinets #1 and #2. Attach each end to its mating hole using an
M4×10 hex screw from the field kit (see Figure 14).
Powerware 9350 Series 685 and 1085 Auxiliary Battery Cabinets
Installation Manual 164201408 Rev. P00 053002
Back of
Battery Cabinet #2
Screw from kit
Bracket from kit
Screw from kit
Bracket from kit
Front of
Battery Cabinet #2
will be flush with each other.
Two small brackets go here
(see detail at left)
BATTERY BATTERY
CABINET #1 CABINET #2
Large bracket goes here
(see Figure 15)
21