Figure 9. Attaching Ups Base To Series 685 Base - Powerware 9350 Installation Manual

FRONT VIEW
Front of UPS
17.
Locate the ground wire from the field kit. Route the ground wire from the
customer ground stud in the battery cabinet, under the lower right-hand battery
tray, through the access hole in the side panel of the UPS, and attach to
customer ground stud in the UPS cabinet. Hardware is provided on each
ground stud.
18.
Repeat Steps 2 through 17 to attach additional Series 685 Battery Cabinets to
the other side of the first battery cabinet. Level the cabinets with the leveling
screws.
Powerware 9350 Series 685 and 1085 Auxiliary Battery Cabinets
Installation Manual 164201408 Rev. P00 053002
TOP VIEW
Nut from kit
Screw from kit

Figure 9. Attaching UPS Base to Series 685 Base

Bracket from kit
Bracket from kit
Front of 685
Battery Cabinet
Ground Wire
Ground Stud
Nut from kit
15