Polycom SpectraLink 6000 System Interface Manual page 8

LinkPlus Interface Guide: Inter-Tel Axxess and Axxent
8
"model" handsets then use the model as a template to program
the other handsets.
• All handsets are different: All handsets are programmed differently,
so each handset will be programmed individually.
Before installation, the parameters of the wired phones should be
verified to plan the parameters required for the handsets.
Extension assignment
What extension numbers will be assigned to the handsets?
Outgoing trunk access
Which trunk group will be selected when the user goes off-hook?
System forwarding
If this system supports forwarding, what is the forwarding path and
forwarding conditions for this telephone? Does it belong to a hunt
group?
Toll restrictions
To which toll restriction class of service should this station be
assigned?
Mailboxes
What are the parameters of this station's voice mailbox ?
Programmable keys
Determine which features, if any, should be programmed on the
handsets. These assignments may emulate assignments on the user's
wired set.
If possible, identify a wired set that is programmed exactly or close to
the way the handsets should be programmed. This set can be used to
copy the programming to the new handsets.
PN: 1725-36135-001_D.doc