End Of Cycle Beeps, Re-Set Defaults - Fisher & Paykel INTUITIVE IWL12 Installation Instructions And User Manual

Adjusting the Wash Settings
S6 End of Cycle Beeps
The beeps signalling the end of the cycle can be set to zero, five or fifteen.
Access the Adjust Settings Menu (refer to page 18).
■
Scroll to the END OF CYCLE BEEPS screen.
■
Use the ADJUST button to highlight the number of beeps you want. Press HOME.
■
S7 Re-set Defaults
If you are wanting to re-set all settings back to those that are set when your machine leaves our
factory.
Access the Adjust Settings Menu (refer to page 18).
■
Press ADJUST and hold for 2 seconds, you will hear a long beep, then a message saying
■
SETTINGS SAVED will appear, then press HOME.
20