Getting Started Quickly - Fisher & Paykel INTUITIVE IWL12 Installation Instructions And User Manual

Getting Started Quickly

Remove the fabric softener dispenser.
■
Place load evenly around the agitator. (Refer to
■
Sorting and Loading page 26).
A. Detergent
Follow the instructions on the detergent package.
■
Use the mark on the agitator nearest to the top of the
■
clothes as a guide to the correct amount of detergent
to use.
Pour the detergent down the centre of the agitator stem.
■
Replace the fabric softener dispenser (this stops small articles falling down the centre of the
■
agitator). (Refer to Detergent page 28).
B. Press POWER
C. How Dirty?
Press the UP or DOWN arrows to change the HOW DIRTY level to suit the amount of soil in your
■
clothes.
If your clothes have "general" stains press the UP arrow until the red STAINED light comes on.
■
(Refer to page 10).
D. Fabric Care
Your Intuitive™ automatically selects AUTO SENSING. This determines the average fabric type of
■
your load and selects the wash action to get the best wash result.
For loads that require special care press the FABRIC CARE button to choose the CREASABLES,
■
WOOL or HANDWASH option. (Refer to page 10).
E. Press START
Your autowasher will start filling and sensing the size and average fabric type of the load.
■
To pause your Intuitive™ at any time press START/PAUSE. (If it is during spray rinse or spin there
■
is a slight delay while the bowl is coasted to a stop and the lid is unlocked).
8
B
C D E