End Of Cycle Beeps - Fisher & Paykel AquaSmart Series Installation Instructions And User Manual

Changing pre-set options
On the High Efficiency cycles you can
change the pre-oset rinse option,
The pre-set rinse option on these cycles
is a water efficient Aqua shower rinse.
This rinse can be altered to provide
a more intensive rinse for people with
sensitive skin.
so!tene!@ ,_
. .....
AquaPlus R!r!se
Softener OFF Aqua Rinse
Med spin light OFF Aqua Rinse
1 Enter the Option Adjustment mode (refer to page 28)_
2 Press SOFTENER to change to an AquaPlus rinse (dispensing model); or SPIN to illuminate 'Med"
spin to select AquaPlus rinse (non--dispensing model).
s Press POWER to saveyour selection.
End of Cycle beeps
Note: This option is not available on the
non-dispensing model.
The number of beeps that signal the end of
the cycle can be altered. Choose between
no beeps, five or fifteen beeps. The BLEACH
button adjusts the cycle signal setting.
No selection No beeps
BmeachOFF
Bleach ON 15 beeps
1 Enter the Option Adjustment mode (refer to page 28).
2 Press the BLEACH button to adjust the cycle signal setting,
s Press POWER to saveyour selection,