Table of Contents
Advertisement
To change the out of balance (OOB) recovery option:
Enter option adjustment mode.
Select the 'Delicate' cycle for CleanSmart™ and FabricSmart™
Select the 'Heavy Duty' cycle for WashSmart™/ Eco and QuickSmart™
Touch the 'More'
button to turn automatic recovery
For QuickSmart™ use the water level button to turn on and off.
Wash temperatures
Enter option adjustment mode.
Select the 'Heavy' cycle for CleanSmart™ and FabricSmart™.
Selcet the 'Regular' cycke for WashSmart™ / Eco and QuickSmart.
Select the wash temperature you want to adjust, eg 'Warm', by touching the 'Wash temp' button.
The digital display screen displays the current setting.
Touch the 'More' or 'Less' button to increase or decrease to the desired temperature. Each increment
is equal to approximately 1°C, except QuickSmart™, each increment is 2°C
End of cycle beeps
The beeps signalling the end of the cycle can be increased or decreased. The default setting is 5 beeps.
To modify the number of beeps sounding at the end of the cycle:
Enter option adjustment mode.
Select the 'Wool' cycle.
Touch the 'More'
or 'Less'
sound at the end of the cycle.
For QuickSmart™ use the water level button to tun on and off.
Factory reset
You can reset your washer to factory default settings:
Enter option adjustment mode.
Select the 'Easy Iron' cycle for CleanSmart™ and FabricSmart™
Select the 'Delicate' cycle for WashSmart™/ Eco and QuickSmart™
The display will show
factory settings.
Note: This action will reset the washer to the default settings. Exit Option Adjustment mode and restart
the washer in normal operating mode.
Touch 'Power'
to exit if you do not wish to reset your washer.
18
button to increase or decrease the number of beeps, or for no beeps to
. Touch and hold Start/ pause button for 3 seconds to reset your washer to its
or
.
Hide quick links:
Advertisement
Table of Contents
