Default Rinse, Creasable Spin Speed, Out Of Balance Recovery - Fisher & Paykel INTUITIVE IWL12 Installation Instructions And User Manual

Adjusting the Wash Settings
S3 Default Rinse = Rinse Default Options
This menu changes the rinse option that is automatically selected when you first turn your
machine on. (Spray and Deep is the standard rinse default for IW812, IW712 and IW512. IWM12
and IWL12 default to a Double Deep rinse). You may wish to change the type of rinse selected
for a number of reasons. If you have a problem with impurities in your water supply you may get
a better wash if you change the rinse option to 2 deep rinses. If you want to conserve water you
could change the rinse option to a single deep rinse or a shower rinse.
Access the Adjust Settings Menu (refer to page 18).
■
Scroll to the DEFAULT RINSE screen. Select the rinse option you prefer.
Spray and Deep
Single Deep
Double Deep
Shower
Shower rinse alternately showers the clothes with water and spins them to remove the sudsy
water. It is not designed to be used with fabric softener, as a shower rinse does not use a deep
rinse it cannot dispense fabric softener correctly.
S4 Creasable Spin Speed
The Creasable fabric care option is designed with a slow spin speed (300 rpm). However, if you wish
to have a faster spin speed you can program Creasables to have a medium spin speed (670rpm).
Access the Adjust Settings Menu (refer to page 18).
■
Scroll to the CREASABLE SPIN SPEED screen.
■
Press ADJUST to select the CREASABLE SPIN SPEED you want, then press HOME.
■
S5 Out of Balance Recovery
When your washer is spinning it can sense when the wash load is out of balance and will stop
and retry spinning up to three times. If the machine still senses an unbalanced load there are two
options the machine can take.
Automatic Recovery Action
Your washer will try to automatically correct the out of balance load. It will fill with water and
agitate to redistribute the load before trying to spin up again.
Machine Stops Action
Your washer will stop, give a short burst of beeps every five seconds, and display a message to let you
know to redistribute the load more evenly yourself. (Use this option if you wish to conserve water).
Your machine arrived, set to the Machine Stops Action.
To set to Automatic Recovery:
Access the Adjust Settings Menu (refer to page 18).
■
Scroll to the OUT OF BALANCE RECOVERY screen.
■
Select ON. Press HOME.
■
= Spray rinse followed by 1 deep rinse
= Short spin followed by 1 deep rinse.
= 2 deep rinses.
= Shower rinse.
19