End Of Cycle Beeps; Factory Reset - Fisher & Paykel WA3927G1 Quick Start Manual

End of Cycle Beeps

The beeps signaling the end of the cycle can be increased or decreased. The default setting is 5 beeps.
To modify the number of beeps sounding at the end of the cycle:
1. Enter Option Adjustment mode (refer to page 32).
2. Select the EASY IRON cycle.
3. Touch the MORE
button to increase the number of beeps or for no beeps to sound at the end of the cycle.

Factory Reset

You can reset your washer to the settings it left the factory with:
1. Enter Option Adjustment mode (refer to page 32).
2. Select the ALLERGY cycle.
3. The display will show "rSt". Touch and hold START/PAUSE for 3 seconds to reset your washer to its factory
settings.
https://producthelp.fisherpaykel.com/us/Wash/Top_Loaders/WashSmart/WA3927G1/User_Guide_WA3927G1/15_changing_...
Fig. 36 Changing the out of balance recovery routine
Fig. 37 Modifying the number of beeps to signal the end of cycle
Updated: Mon, 06 Jun 2022 10:14:27 GMT
Powered by
4