Table of Contents
Advertisement
The Memory function is for saving the current camera settings even
when the camera is turned off.
Forsomecamerasettings,
theMemoryfunction
isalwayssetto
[_ (On)
(thesettingsaresavedwhenthecameraisturnedoff),whiteforothers
you can choose on or off (to choose whether the settings are saved or
notwhenthecameraisturnedoff).Theitemswhichcanbesetto[_
(On)
or [] (Off) in the Memory function are shown in the table below. (Items
not listed here wilt be saved in the selected settings when the camera is
turned off.) If you select _ (On), the settings wilt be saved in the status
they were in immediately before the camera was turned off. If you select
[] (Off), the settings will be reset to the defaults when the camera is
turned off. The table below also shows whether the Memory default
setting for each item is on or off.
Default
Item
Description
Setting
Flash
Mode
The flash mode set with the four-way
controller
( • ) (p.80)
_z
Drive Mode
The drive mode set with the four-way
controller
(A) (p.71,
D
p.72)
Focus
Mode
The focus mode set with the four-way
controller
(1_) (p.78)
D
Zoom
Position
The zoom position
set with the Zoom/_/,)
button
(p.73)
D
MF Position
The manual
focus
position
set with the four-way
controller
D
(A v) (p.79)
White
Balance
The [White Balance]
setting
on the [1_1 Rec. Mode]
menu
D
(p.86)
Sensitivity
The [Sensitivity]
setting
on the [1_1 Rec. Mode] menu (p.89)
D
EV
The [EV Compensation]
setting
on the [1_ Rec. Mode]
D
Compensation
menu (p.75)
Digital
Zoom
The [Digital
Zoom] setting
on the [1_1 Rec. Mode]
menu
(p.74)
_z
The LCD monitor
information
display
mode set with the
DISPLAY
OK/DISPLAY
button
(p.76, p.111 )
D
File No.
If a new SD Memory
Card is inserted
when
On has been
_z
selected,
file numbers
are assigned
sequentially.
Advertisement
Table of Contents
