Pentax OPTIO M30 Operating Manual page 74

Hide thumbs Also See for OPTIO M30:
Table of Contents

Advertisement

.
_ _3,
4
1,2
In this mode,
pictures
are taken continuously
for as long as the shutter
release
button
is pressed.
i
Continuous
Each time a picture is taken, the image is saved in the memory
before the next image is taken. The higher the image quality, the
_J
Shoot ng
longer the interval between shots.
1
Press the four-way controller (A) in a
mode.
2
use the four-way controller (• I_)
to select _ (Continuous Shooting)
and press the OK button.
The camera
is ready to take a series of
pictures.
3
Press the shutter release button
halfway.
The focus frame on the LCD monitor turns green if the subject is in
focus.
4
Press the shutter release button fully.
Pictures
are taken continuously
for as long as you keep the shutter
release button pressed.
* The flash will not discharge in Continuous Shooting mode.
, The continuous shooting function is not available in D,
!,
_,
_,
{, _ or r_l mode.
, You can Continue shooting until the memorY capacity of the SD
Memory Card or built, in memory is full.
, The interval of continuous shooting will vary according to the
Recorded Pixels and Quality Level settings.
• The focus, exposure and white balance are locked with the first image.

Advertisement

Table of Contents
loading

Table of Contents