Pentax OPTIO M30 Operating Manual page 6

Hide thumbs Also See for OPTIO M30:
Table of Contents

Advertisement

• Places of high temperature
and humidity should be avoided.
Particular
care
should be taken regarding
vehicles, which can become very hot inside.
• Storing the camera where pesticides
and chemicals
are handled should be
avoided.
Remove from case and store in a well-ventilated
place to prevent
the camera
from becoming
moldy during storage.
• As this camera is not waterproof,
do not use the camera where it may come
in contact
with rain, water or any other liquid.
• Ensure that the camera is not subjected
to substantial
vibrations,
shock, or
pressure.
Use a cushion
to protect the camera when it is subjected
to the
vibrations
of a motorbike,
car, ship, etc.
• The temperature
range in which the camera
can be used is 0°C to 40°C
(32°F to 104°F).
• The liquid crystal display will become
black at a high temperature
but will
return to normal when normal temperatures
are returned to.
• The response
speed of the liquid crystal display becomes
slow at low
temperatures.
This is due to the properties
of the liquid crystal and is not a
fault.
• Periodic checks are recommended
every 1 to 2 years in order to maintain
high performance.
• If the camera is subjected
to rapid temperature
changes,
condensation
may form on the inside and outside
of the camera.
Therefore
put the
camera
in a bag or plastic bag, and take the camera
out when the
difference
in temperature
has subsided.
• Be careful not to allow dirt, mud, sand, dust, water, toxic gases or salt to
enter the camera
as this may damage
the camera.
Wipe away any
raindrops
or water droplets and allow the camera
to dry.
• Refer to "Precautions
When Using an SD Memory
Card" (p.27) regarding
the SD Memory
Card.
• Please note that formatting
an SD memory
card or built-in
memory will
delete all data; however
it may still be possible to recover that data using
off-the-shelf
data recovery software.
Please manage your camera's
memory
at your own risk.
• Please do not press forcefully
on the LCD monitor.
This could cause
breakage
or malfunction.
• Be careful not to sit down with the camera
in your back pocket as this may
damage
the exterior
of the camera or the LCD monitor.
• When using a tripod with the camera,
be careful not to overtighten
the
screw in the tripod socket on the camera.
• The AC plug cord supplied
with the camera
is for exclusive
use with the
battery
charger D-BC63.
Do not use it with any other equipment.

Advertisement

Table of Contents
loading

Table of Contents