Table of Contents
Advertisement
2
Press the four-way
controller
(•)
in a
mode.
The flash mode changes each time the
button is pressed. You can also change the
setting using the four-way controller (A • ).
Press the OK
button.
The camera returns to capture status with
the selected flash mode.
•[About the red-eye phenomenon]
Taking pictures using the flash may cause the subject's eyes to
appear red in the resulting picture. This phenomenon occurs when
the light from the flash is reflected in the subject's eyes. It can be
reduced by illuminating the area around the subject or moving closer
to the subject and zooming out to a wider angle. Setting the flash
mode to & (Auto + Red-eye) or _%(Flash On + Red-eye) is also an
effective way of reducing red eyes.
Saving the Flash Mode ,_p.95
I
Advertisement
Table of Contents
