Table of Contents
Advertisement
9
10
Use the four-way
controller
(• • • _) to choose the paper
size.
You can only choose
a size that is
supported
by your printer.
Press the OK button.
The Paper Size setting is saved,
and the
screen returns to the print settings screen.
CardPostcard100x150L
A3A48"x
10"
2L1Letter
l"x 17"_OK
'MENUiC an cel
11
use the four-way
controller (• •) to select [Paper Type]
and press the four-way
controller (_).
A pull-down
menu appears.
12
Use the four-way controller (• • ) to select the paper
type and press the OK button.
The Paper Type setting
is saved, and the screen returns to the print
settings screen.
Set [Quality] and [Border Status] in the same way as
in Steps 11 and 12.
If you select [Q
Setting] for each print setting,
images
are printed
according
to the settings made on the printer.
Paper Type with more -k supports
higher quality paper.
Quality with more -k indicates
higher print quality.
The print settings
screen appears
after each item has been set.
13
Press the MENU button.
The screen returns to the confirmation
dialog.
14
Press the OK button.
The image is printed according
to the settings.
Press the MENU
button to cancel printing.
• The se!f-timer
!amp lights while the camera is communicating
with
the printer; and blinks wh le the card is being accessed
and during
lamp is blinking.
• The [Paper Size], [paPer Type], [Qua!!ty] and [Border Statu s]
settings
are reset to the defaults when the camera is turned off.
Disconnecting
the Cable from the Printer ,_p. 140
]
Advertisement
Table of Contents
