Pentax OPTIO M30 Operating Manual page 66

Hide thumbs Also See for OPTIO M30:
Table of Contents

Advertisement

• If any other functions
have been assigned
to the Green button, the
camera
does not switch to Green Mode. The assigned
function
is
displayed.
(p.55)
• In Green Mode. you cannot change the information
displayed
on
the LCD monitor
by pressing
the OK/DISPLAY
button.
• You cannot use the [1_ Rec. Mode]
menu or Capture
Mode Palette in
Green Mode. If you try to display the
[1_1Rec. Mode] menu or Capture Mode
Palette. t_ (key lock icon) and a
message
appear.
• If you switched to r-_ mode from Green
Mode. you cannot display the
[XJ,Setting] menu by pressing the MENU
button. If you tryto display
the [XJ, Setting] menu. t_ (key lock icon) and a message appear.
• When the camera is turned off in the Green Mode, it turns on in the
Green
Mode next time the power switch
is pressed.
* The Green Mode settings are as shown below.
Flash Mode
Drive Mode
Focus Mode
Information Display
Recorded Pixels
Quality Level
White Balance
Focusing Area
Sensitivity
EV Compensation
Digital Zoom
Instant Review
Sharpness
Saturation
Contrast
"1
*2
*3
_-A (Auto) q
[] (Standard) .2
AF (Standard) .3
Standard
7_
-k--k (Better)
AWB (Auto)
Lr J_(Multiple)
Auto
+0.0
_z (On)
1 sec
:-_+.
(Standard)
:-_+.
(Standard)
_-_+.
(Standard)
Can be set to _ (Flash
Off)
Can be set to _ (10 sec. Self-timer)
or _ (2 sec. Self-timer).
(The
setting
in a shooting
mode other
than Green
Mode is available.)
Can be set to •
(Macro),
s_ (super
macro)
and PF (Pan Focus)

Advertisement

Table of Contents
loading

Table of Contents