Table of Contents
Advertisement
By connecting the camera to a printer that supports PictBridge using the
USB cable (I-USB7) provided, you can print images directly from the
camera without using a PC. Connect the camera to the printer and select
the images you want to print and the number of copies on the camera.
• You are recommended
to use the AC adapter kit K-AC64 when the
camera
is connected
to the printer. The printer may not work
properly or the image data may be lost if the battery
runs out of
power while the camera
is con nected to the printer.
• Do not disconnect
the USB cable during data transfer.
• Depending
on the type of printer, not all the settings made on the
camera
(such as print settings
and DPOF settings)
may be valid
• A printing error may occur if the selected
number of copies
exceeds
500.
• Printing the index of the images (printing multiple images on a single
sheet) cannot be performed
directly from the camera.
Make the
settings on a printer supporting
index printing function
or use a PC.
1
Select [PictBridge] for the [USB Connection] mode on
the [_1_ Setting] menu.
Refer to "Changing
the USB Connection
Mode" (p.155).
Turn off the camera.
2
3
4
5
Connect the camera to the printer using the USB cable
provided.
Turn the printer on.
When the printer is ready to print,
turn the camera on.
The printing mode selection
screen
appears.
Advertisement
Table of Contents
