Installation Instructions - Fisher & Paykel OR90 Series Installation Instructions And User Manual

Installation instructions

6
The cooker must be installed by a qualified technician and in compliance with local
safety standards. This cookers has class "2/1" overheating protection so that it can be installed
next to a cabinet.
If the cooker is installed adjacent to furniture which is higher than the gas hob cooktop, a
gap of at least 200 mm must be left between the side of the cooker and the furniture.
The furniture walls adjacent to the
cooker must be made of material
resistant to heat.The veneered
synthetical material and the glue used
must be resistant to a temperature
of 90°C in order to avoid ungluing or
deformations.
The cooker may be located in a
kitchen, a kitchen/diner or bed-sitting
room but not in a room containing a
bath or shower.
Curtains must not be fitted
immediately behind appliance or
within 500 mm of the sides.
If the cooker is located on a pedestal
it is necessary to provide safety
measures to prevent falling out.
It is essential that the cooker is
positioned as stated.
Figure 1 Cooker dimensions and capacity
U A
O T
Figure 2 Correct distances from cooker