Package Contents, Assembly & Getting Started - X-TREME X-300 Owner's Manual

PACKAGE CONTENTS
Your scooter comes with the following items in the box. Please locate all of the
following:
1. X-300 Scooter
2. 24V Battery Charger
3. Tool Kit & User Manual
4. Seat
5. Seat Post & Clamp
GETTING STARTED
Please read and understand these instructions and the OPERATING
PROCEDURES section, prior to starting or riding your scooter!
Assembly
1. Carefully remove the scooter from the box.
2. To unfold the scooter, begin by pressing
down on the FOLDING HANDLE with one
hand while gently pulling up on the
handlebars with the other.
3. Fully extend the handlebars to their upright
position until you feel the mechanism lock
into place.
4. Attach the handlebars by first loosening the
4 Allen head bolts and removing the top of
the handlebar cap. Lay the handlebar on
top of the handlebar bracket being sure to
orient the bars in the correct riding position
with the throttle on the rider's right side.
Secure the handlebars to the post by
tightening the bolts on the clamp with the
enclosed Allen wrench as shown.
5. Secure the hand brakes in place by using
the provided Allen Wrench to first loosen
the tension bolts. Adjust the levers to a
comfortable position and tighten the bolts.
*BE CAREFUL NOT TO PULL ON THE
CABLES!
Page6