Package Contents; Getting Started/Assembly - X-TREME XP-707 Owner's Manual

PACKAGE CONTENTS

Your X-Treme XP-707 comes with the following items in the box. Please locate
all of the following:
1. The X-Treme XP-707 Scooter
2. 36V Battery Charger
3. Tool Kit
4. Product Handbook
5. Smoked Windshield
6. Left & Right Foot Pegs
7. Seat Pad
8. Various Nuts/Bolts
GETTING STARTED
Please read and understand these instructions and the OPERATING
PROCEDURES section, prior to starting or riding your XP-707
Fig. 1
Fig. 2
Fig. 3
Assembly
1. Carefully remove the XP-707 from the box.
2. Unfold the left and right handlebars and
secure them at the desired comfortable
position, depending on rider by tightening
the bolts. Fig. 1
3. Adjust the hand brakes to the desired
position and secure them in place by
tightening the bolt. Fig. 2
4. Attach the smoked windshield to the front
fairing using the attached 4 nuts/bolts.
Fig. 3
5. Attach the seat/tank fairing to the frame
using the 4 enclosed nuts.
6. Finally, attach the 2 foot pegs to the frame
and adjust to the desired position. Tighten
into place.
Fig. 4
Page7