Table of Contents
Advertisement
SQUEAKY BRAKES
The brakes may squeak before they are broken in. This is normal and will not affect the
function or performance of the brakes. With continued use the squeak should go away.
TIRE PRESSURE
The tire must be inflated to a maximum of 50 P.S.I. It is also recommended to use a tube
additive like Slime, available from any motorcycle shop, to avoid inconvenient punctures.
Empty all air from the tire, prior to loosening the bolt to split the rim.
MAINTENANCE
RECOMMENDED TOOLS
To adjust and service the scooter you will need the following tools:
Allen Wrenches: 3/4/5/6 mm
Wrenches: 10/13/13 mm Open end wrench
Large Adjustable Crescent Wrench
Philips Head Screwdrivers
Oil, Grease or Lubricant
ADJUSTING THE HEAD UNIT
The head unit will come adjusted from the factory. However, riding on rough terrain and
general use may cause the head unit to become loose over time. It may be necessary to
adjust the head unit from time to time.
To adjust the head unit:
1. Rotate the handle bar as far right as it will
go to expose the HEAD UNIT. (see fig
left)
2. Using a large adjustable wrench, gently
turn the BEARING LOCK clockwise to
tighten. *DO NOT OVER TIGHTEN OR
IT WILL DAMAGE THE BEARINGS.
Page10
Advertisement
Table of Contents
