Failure to follow these INSTRUCTIONS will VOID YOUR WARRANTY! This PRODUCT IS NOT INTENDED FOR EXTREME or OFF-ROAD Use! Please take care of your XR-301! DO NOT JUMP or ABUSE THIS PRODUCT! DO NOT RIDE IN WET/ICY CONDITIONS! Failure to follow these instructions will...
Page 3
IMPORTANT PLEASE READ THIS BEFORE USING THIS PRODUCT READ THIS FIRST! WARNING This product does not conform to Federal Motor Vehicle Standards and is not intended for operation on public streets, roads or highways. Serious injury can result from the unsafe operations of this product. Operator can minimize these risks by using certain safety equipment such as: safety helmet, goggles, gloves, elbow and kneepads and appropriate footwear.
Avoid unintentional starts by turning the scooter off while not in use. To avoid the risk of a short circuit in the electrical parts, do not use your X-Treme Electric scooter in the rain and never spray or wash off your scooter with water. ...
TABLE OF CONTENTS IMPORTANT INFORMATION…………………………………….………………………...……2-3 QUICK REFERENCE……………………………………………………………….4 TABLE OF CONTENTS……………………………….…………….………………5 GETTING TO KNOW YOUR X-TREME XR-301………………..………...……..6 PACKAGE CONTENTS…………………………………………………………….7 GETTING STARTED………………..……………………………..………………..7 ASSEMBLY………………………………………………………………….…..…7-9 CHARGING……………………………………………………………..………….10 OPERATING INSTRUCTIONS…………………………………………………...10 IMPORTANT SAFETY GUILDINES..…………………………….………..…10-11 MAINTENANCE…………………………………………………………………….11 OTHER QUESTIONS….…………………………………………………………..11 GENERAL INFORMATION/TECH SUPPORT………………………………….12 Page5...
PACKAGE CONTENTS Your X-Treme XR-301 comes with the following items in the box. Please locate all of the following: 1. Body, 1pc 1pcs 2. Handlebar Assembly, 1pc 9. Rear & Front Wheel, 1pc ea 3. Side Mirrors, 2pc 10. Front Fender, 1pc 4.
Page 8
Assemble the front portion of the scooter: Handlebar/dash and windshield assembly 1. Install the yellow windshield to the face guard using enclosed nuts/bolts and washers. 2. Attach the dash assembly to the face guard, inserting it into place and securing it with the two enclosed nuts. 3.
Page 9
5. Install the side mirrors as shown. Finish by connecting the wires under the seat to the battery and close the seat cover/connect to the body using the enclosed bolt. Your XR-301 is now complete and ready for use. Page9...
Operation Instructions *Be sure all assembly is complete before riding. *Disconnect charger from scooter and store properly. Your scooter is operated using a foot push button. To ride the scooter, simply set on the scooter, turn the speed switch to the desired speed and using your right foot, push the foot button located on the right footplate.
For additional questions, service instructions, further information and important phone numbers, please go to the X-Treme website at www.x-tremescooters.com Thank you for purchasing an X-Treme XR-301 and please tell your friends how much fun you’re having on the X-Treme XR-301...