Table of Contents
Advertisement
Feature
Parameter Setting Area
Text Color Dropdown
Box
Background Color
Dropdown Box
Transparency Dropdown
Box
Display Height Check
Box
Text Position – V-
Position
Communication Interface Area
Connect/Disconnect
TCP/IP Check box
RS-232 Check box
Scrolling Mode Area
Blank Time (Sec)
Dropdown Box
Speed Dropdown Box
Mode
Send Text Area
Message
Repeat Dropdown Box
H-Offset Dropdown Box
Start Button
Stop Button
Quit Button
Load Setting Button
Save Setting Button
VP-729 - Using Text Overlay
Function
Select the Text color
Set the text background color
Select On for a transparent background or Off for a non-
transparent background
Set the thickness of the background stripe (72 or 36)
Set the vertical position of the text background on the display
screen (Top, Center or Bottom)
Connect the machine or disconnect
When selected, set the IP Address (or search the IP
Address) and Port to connect via Ethernet (you have to
select the connection type before connecting the software to
the machine)
When selected, set the COM port and Baud Rate (9600) to
connect via the RS-232 connector
Set the blank delay time (from 1 to 5)
Set the speed at which the text moves on the display (from 1
to 5)
Set to Still (fixed text) or Scrolling (text moves across the
display)
Type the desired text in the Message box
Set the number of times that the text message will scroll
across the screen (1 to 20), or set to Forever to repeat the
text message continuously
For example, set to 2 to repeat the text twice
After selecting the Static mode, use the H-Offset box to
select the horizontal position of the text (Left Center or Right)
Click to display the text on screen
Click to stop scrolling on screen
Click to quit the program
Click to load a previously saved setting
Click to save the current setting
37
Advertisement
Table of Contents
