FS-8700-36 Weigh-Tronix
1. Weigh-Tronix Description
The Weigh-Tronix driver allows the FieldServer to transfer data to and from devices
over either RS-232 or RS-485 using Weigh-Tronix protocol. The FieldServer emulates a
Client only.
The information that follows describes how to expand upon the factory defaults provided
in the configuration files included with the FieldServer.
Weigh-Tronix
Weigh-Tronix
Weigh-Tronix
*Other devices – contact FST
1.1 Hardware/Software
Supplied by FieldServer Technologies.
FieldServer
Technologies
PART #
FS-8915-10
FS-8917-01
Provided by user
PART #
FieldServer Technologies 1991 Tarob Court, Milpitas, California 95035 (408) 262-2299 fax: (408) 262-9042
Visit our website: www.fieldserver.com
Devices Supported
Manuf
Model
WI 125
WI 127
WI 130
UTP cable (7 foot) for RS-232 use
RJ45 to DB25M connector adapter
Weigh-Tronix Simposer Software
Cables for PC to scale to configure scale
Notes
DESCRIPTION
DESCRIPTION
E-mail: support@fieldserver.com
Page 1
Driver Manual