Table of Contents
Advertisement
FS-8700-15 Modbus Daniels Manual
1.
Modbus Daniels Description
The Modbus Daniels driver allows the FieldServer to transfer data to and from devices over
either RS-232 or RS-485 using Modbus Daniels protocol. The FieldServer can only emulate a
Client.
Modbus Daniels is an inclusion into Modbus ASCII, allowing floats to be used. Modbus Daniels
is designed to support floats in the address range 7000 to 7999. The "Double" data type is not
supported. Other standard Modbus data types are supported.
Max Nodes Supported
FieldServer Mode
Client
2.
Driver Scope of Supply
2.1.
Supplied by FieldServer Technologies for this driver
FieldServer Technologies
PART #
FS-8915-10
FS-8917-01
SPA59132
-
2.2.
Provided by the Supplier of 3
2.2.1.
The Modbus Daniels device must be set to use Modbus ASCII protocol.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com
Nodes
Comments
The maximum achievable number of devices on the
network may be less depending on device loading and
255
network speed characteristics. Only one client device
allowed on multidrop systems.
Description
UTP cable (7 foot) for RS_232 use
RJ45 to DB25M connection adapter
RS-485 connection adapter
Driver Manual.
rd
Required 3
Party Configuration
rd
Party Equipment
Page 1 of 7
Advertisement
Table of Contents
