Fieldserver Related Map Descriptor Parameters; Driver Related Map Descriptor Parameters - FieldServer FS-8700-84 Driver Manual

Lutron elumen driver
Table of Contents

Advertisement

FS-8700-84_Lutron_eLumen Driver Manual
4.1.1.
Column Title
Map_Descriptor_Name
Data_Array_Name
Data_Array_Location
Function
4.1.2.
Column Title
Node_Name
GRAFIK_command
Link
Area
Link_station
Switch
Zone
Sys_var
Panel
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com

FieldServer Related Map Descriptor Parameters

Name of this Map
Descriptor
Name of Data Array
where data is to be
stored in the
FieldServer
Starting location in
Data Array
Function of Client
Map Descriptor

Driver Related Map Descriptor Parameters

Name of Node to fetch
data from
Specifies the command
to be sent to the
eLumen.
Wallstation link number
GRAFIK system area
number
Wallstation on link's
number
Wallstation switch
number
GRAFIK system zone
number
GRAFIK system variable
number
GRAFIK panel number
Function
Up to 32 alphanumeric
characters
One of the Data Array
names from "Data Array"
section above
0 to maximum specified in
"Data Array" section
above
ARS, RDBC, WRBC,
WRBX, AWT
Function
Page 8 of 36
Legal Values
Legal Values
One of the node names
specified in "Client Node
Descriptor" above
A list of commands is
provided in Appendix A.
0–11 for
GRAFIK_command:
ena_wallstation,
dis_wallstation,
sim_ws_sw_press,
sim_ws_sw_rls,
0-31 for
GRAFIK_command:
wallstation_status,
switch_status,
0–511
0–31
0–31
0–511
0–65535
0–511

Advertisement

Table of Contents
loading

Table of Contents