Active Read On Startup: Retrieving Names - FieldServer FS-8700-84 Driver Manual

FS-8700-84_Lutron_eLumen Driver Manual
4.1.49.

Active read on startup: Retrieving names

Warning: Only one (1) active read on startup Map Descriptor may be used.
The retrieval of area, scene and zone names is done with a single active read on startup (ars ) Map Descriptor. Enter the
start and end numbers for the names you want to retrieve from the eLumen. The names will be stored sequentially in the
indicated Data Arrays
// Client side Map Descriptors
Map_Descriptors
Map_Descriptor_Name, Function,
Get_Names, ars,
DA_Scene_Names_Offset, Scene_Names_Start,
0, 0,
Area names storage format
Position from DA_Area_Names_Offset
0
40
80
..
40 * name_end
Scene names storage format
Position from DA_Scene_Names_Offset
0
40
80
..
40 * name_end
Zone names storage format
Position from DA_Zone_Names_Offset
0
40
80
..
40 * name_end
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
Node_Name, GRAFIK_command,
LUT_GRF6_0, get_names,
Scene_Names_End, DA_Zone_Names,
50, Zone_Names,
Description
Area (name_start) name
Area (name_start+1) name
Area (name_start+2) name
Area (name_end) name
Description
Scene (name_start) name
Scene (name_start+1) name
Scene (name_start+2) name
Scene (name_end) name
Description
Zone (name_start) name
Zone (name_start+1) name
Zone (name_start+2) name
Zone (name_end) name
Page 34 of 36
DA_Area_Names, DA_Area_Names_Offset,
Area_Names, 0,
DA_Zone_Names_Offset,
0,
Area_Names_Start, Area_Names_End,
0, 511,
Zone_Names_Start, Zone_Names_End,
0, 511,
Length
1