Table of Contents
Advertisement
FS-8700-43 VESDA Driver Manual
5.2
Client Side Node Parameters
Section Title
Nodes
Column Title
Function
Node_Name
Provide name for Node
Protocol
Specify protocol used
Port
Specify which port the device is connected to the FieldServer
Timeout*
Specify time allowed between poll and responses.
Example:
// Client Side Nodes
Nodes
Node_Name
, Protocol
VESDA_HLI
, VESDA
5.3
Client Side Map Descriptor Parameters
5.3.1 FieldServer Related Map Descriptor Parameters
Column Title
Map_Descriptor_Name
Data_Array_Name
Data_Array_Location
Function
3
Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for details of the ports available
on specific hardware.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com
, Port
, Timeout
, P1
, 10.0s
Function
Name of this Map Descriptor
Name of Data Array where data is to be
stored in the FieldServer. Only used for
commands 1,4,6,12.
Starting location in Data Array
Function of Client Map Descriptor. A
Command is a write, and a Response is a
read
Page 8 of 28
Legal Values
Up to 32 alphanumeric characters
VESDA
3
P1-P8, R1-R2
≤10s, 2s
Legal Values
Up to 32 alphanumeric characters
One of the Data Array names specified
in Section 4. Must be of type BIT
0
to
(Data_Array_Length
specified in Section 4.
Rdbc, Wrbc, Wrbx, Awt
-1)
as
Advertisement
Table of Contents
