Table of Contents
Advertisement
FS-8700-84_Lutron_eLumen Driver Manual
4.1.33.
System Control Commands containing no Parameters: Simulate wallstation(s) switch press
// Client side Map Descriptors
Map_Descriptors
Map_Descriptor_Name,
Data_Array_Name,
Ws_sw_press,
Lut_triggers,
DA_Lut_List data setup
Position from DA_Lut_List_Offset
0
1
2
3
4
..
63
64
Note: 1 to 32 switch ids may be used in a single command. To trigger the command, write the number of switch IDs into the Data Array specified
by Data_Array_Name at Data_Array_Offset.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
Data_Array_Offset,
Function,
Node_Name,
16,
awt,
LUT_GRF6_0,
Description
Link number ( 0-11 )
Station of link ( 0-31 ) of Switch ID 0
Switch on station ( 0-31 ) of Switch ID 0
Station of link ( 0-31 ) of Switch ID 1
Switch on station ( 0-31 ) of Switch ID 1
..
Station of link ( 0-31 ) of Switch ID 31
Switch on station ( 0-31 ) of Switch ID 31
Page 25 of 36
GRAFIK_command,
DA_Lut_List,
sim_ws_sw_press,
Sim_sw_list,
DA_Lut_List_Offset,
Length
0,
1
Advertisement
Table of Contents
