Map Descriptor Example: Standard Example - FieldServer FS-8700-130 Driver Manual

FS-8700-130 Notifier NCA2/NFS-3030 Manual

5.4.3 Map Descriptor Example: Standard example

This shows the standard Map Descriptor setup for one Node with 1 loop and all 159 modules and 159 detectors installed. This Node also has all boards, panel
and bell circuits
//
// Client Side Map Descriptor
//
Map_Descriptors
Map_Descriptor_Name , Data_Array_Name
SMD_N2_Troubles , DA_SYS_N2
SMD_N2_PANEL , DA_N2_PANEL
SMD_N2_PANEL_T , DA_N2_PANEL_T
SMD_N2_BELL_T , DA_N2_BELL_T
SMD_N2L01D , DA_N2L01D
SMD_N2L01D_T , DA_N2L01D_T
SMD_N2L01M , DA_N2L01M
SMD_N2L01M_T , DA_N2L01M_T
All Map Descriptors are
Select the array
Passive; waiting for a message
for data storage
from the Notifier panel.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-2269 Toll Free: (888) 509-1970 email: support@fieldserver.com
, Data_Array_Offset , Function , Node_Name
, 0 , Passive , NODE2
, 0 , Passive , NODE2
, 0 , Passive , NODE2
, 0 , Passive , NODE2
, 0 , Passive , NODE2
, 0 , Passive , NODE2
, 0 , Passive , NODE2
, 0 , Passive , NODE2
Identify the Loop id for
which this Map Descriptor
will store data
Page 11 of 21
For Node, Panel and
Bell mapping, the Loop
parameter is not
applicable
, Loop , Data_Type , Address
, - , Node_Trouble , 1
, - , Panel , 1
, - , Panel_Trouble , 1
, - , Bell_Trouble , 1
, 1 , Detector , 1
, 1 , Detector_Trouble , 1
, 1 , Module , 1
, 1 , Module_Trouble , 1
Specify
Data Type
, Length
, 508
, 1056
Node
, 96
Events
, 4
, 1749
, 159
Loop 1
Events
, 1749
, 159
Specify range,
starting address
and length