I Set Mode Items - Icom IC-M401EURO Instruction Manual

I Set mode items

Scan mode
The scan mode can be selected as a normal scan or priority
scan. (p. 12)
Priority scan (default)
Scan resume timer
The scan resume timer can be selected as a pause (OFF) or
timer scan (ON). When OFF is selected, the scan pauses until
the signal disappears. When ON is selected, the scan pauses 5
sec. and resumes even if a signal is being received on chan-
nels except for Channel 16.
Scan timer OFF (default)
Dualwatch/tri-watch
This item can be selected as dualwatch or tri-watch. (p. 10)
Normal scan
Beep tone
You can select silent operation by turning beep tones OFF, or
you can have confirmation beeps sound at the push of a
switch by turning beep tones ON.
LCD contrast
This item adjusts the contrast of
Scan timer ON
the LCD in 4 steps.
SET MODE
Dual watch (default) Tri-watch
Beep tone ON (default) Beep tone OFF
LCD contrast 3 (default)
6
15