Charging Station - Husqvarna AUTOMOWER 305 Operator's Manual

Chassis and blade disc
1. Set the main switch in position 0.
2. Wear protective gloves.
3. Lift the robotic lawnmower onto its side.
4. Clean the blade disc and chassis using e.g. a
dish brush.
At the same time, check that the blade disc
rotates freely in relation to the foot guard.
If long blades of grass or other objects find their
way in, these may impede the blade disc. Even
a slight braking effect leads to a higher
consumption of energy and longer mowing
times, and at the worst will prevent the mower
from being able to mow a large lawn. The blade
disk must be removed to carry out a more
thorough cleaning. If necessary, contact your
dealer.
Chassis
Clean the underside of the chassis. Brush or wipe
with a damp cloth.
Wheels
Clean around the front wheels and rear wheel as well
as the rear wheel bracket.
Body
Use a damp, soft sponge or cloth to clean the body.
If the body is very dirty it may be necessary to use a
soap solution or washing-up liquid.

Charging station

Clean the charging station regularly from grass,
leaves, twigs and other objects that may impede
docking.
8. MAINTENANCE
3012-1023
3012-272
3012-973
3012-974
3012-975
English - 59