Presentation - Husqvarna AUTOMOWER 305 Operator's Manual

2. Presentation

This chapter contains information that is important to
be aware of when planning the installation.
Installing a Husqvarna robotic lawnmower involves
four main components:
• A robotic lawnmower that mows the lawn by
essentially operating in a random pattern.
The robotic lawnmower is powered by a
maintenance-free battery.
• Charging station, where your robotic lawnmower
returns when the charge level in the battery
becomes too low.
The charging station has three functions:
• To send control signals along the boundary
wire.
• To send control signals along the guide wire so
that the robotic lawnmower can find the
charging station.
• To charge the robotic lawnmower battery.
• A transformer, which is connected between the
charging station and a 230 V wall socket. The
transformer is connected to the wall socket and
to the charging station using a 10 m long low
voltage cable. The low voltage cable must not be
shortened or extended.
A 20 meter low voltage cable is available to
purchase as an accessory. Please contact your
dealer for more information.
• Loop wire, laid in a loop around the robotic
lawnmower's working area. The loop wire is laid
around the edges of the lawn and around objects
and plants that the robotic lawnmower must not
run into. The loop wire is used both as a
boundary wire and a guide wire.
The loop wire supplied for the installation is
200 m long (150 m for the Automower® 305).
If it is not long enough, more loop wire can be
purchased and spliced onto the existing loop
wire with an original coupler.
The maximum permitted length for the loop wire is
250 m.
2. PRESENTATION
3012-964
3012-965
3018-063
3012-221
English - 11