Settings - Husqvarna AUTOMOWER 305 Operator's Manual

New loop signal
The loop signal is randomly selected to create a
unique link between the mower and the charging
station. In rare cases, there may be a need to
generate a new signal, for instance if two adjacent
installations have a very similar signal.
• Put the mower in the charging station.
• Select New loop signal in the menu and
press OK.

6.6 Settings

The following operating settings are available via this
selection in the main menu.
• Time & Date
to set the current time and date, and the required
time and date format.
• Language
to select the menu language.
• Reset user settings
to reset the mower to the settings it had when it
left the factory.
Time & Date
This function allows you to set current time and
required time format in the robotic lawnmower.
• Time
Enter the correct time and press OK to exit.
• Time format
Place the cursor at the required time format:
12h 24h. Press OK to exit.
• Date
Enter correct date and press OK to exit.
• Date format
Place the cursor at the required date format:
YYYY-MM-DD (year-month-day)
MM-DD-YYYY (month-day-year)
DD-MM-YYYY (day-month-year).
Exit by pressing OK.
Language
Set language with this function.
To select the language: Place the cursor at Language
and press OK. Place the cursor at the required
language and press OK.
6. MENU FUNCTIONS
Change PIN code
Security level
New loop signal
Timer
Installation
Security
Settings
Time & Date
Language
Reset customer
setting
Time & Date
Language
Reset customer
setting
Time & Date
Language
Reset customer
setting
Time
Time format
Date
Date format
English - 51