Husqvarna AUTOMOWER 305 Operator's Manual page 18

The charging station must be positioned with a great
deal of free space in front of it (at least 3 metres). It
should also be centrally placed in the working area to
make it easier for the robotic lawnmower to reach all
areas in the working area.
Do not put the charging station in confined spaces in
the working area. There must be a straight boundary
wire, at least 1.5 metres long, to the right and left of
the charging station. The wire must be laid straight
out from the rear end of the charging station. Any
other locations can mean that the robotic lawnmower
enters the charging station sideways and will have
difficulty docking.
Do not put the charging station in a corner in the
working area.
The charging station must be positioned on relatively
level ground. The front end of the charging station
must be a maximum of 3 cm higher than the back
end. The front end of the charging station must never
be lower than the back end.
The charging station must not be positioned in a way
that can bend its base plate.
18 - English
3. INSTALLATION
3
3012-931
3018-067
3020-043
3020-043
3012-932
3012-933