Setting Spindle Speed - Grizzly G0755 Owner's Manual

Setting Spindle Speed

the chart below explains how to position the
spindle range and speed levers to set the desired
spindle speed.
Spindle Speed Range Lever
90 rpM
210 rpM
345 rpM
670 rpM
1180 rpM
1970 rpM
change spindle speed ONLY when the
spindle is completely stopped. Otherwise,
machine damage could occur.
-26-
Speed Lever
L 1
L 2
L 3
h 1
h 2
h 3
With the spindle completely stopped, position the
spindle range and speed levers (see Figure 27)
to set the spindle speed.
Note: If the levers will not move to the desired
position, rotate the spindle by hand while applying
pressure on the lever. When the gear teeth align,
the lever will move into place.
spindle speed Chart
range
Lever
Figure 27. spindle speed controls.
Model G0755 (Mfg. Since 1/13)
speed
Lever