Restore Factory Default Setting; Reset Button - Grandstream Networks GXV3615 User Manual

R F
ESTORE ACTORY
WARNING!
Restoring the Factory Default Setting will DELETE all configuration information of the camera. Please
BACKUP or PRINT out all the settings before approach to following steps. Grandstream will not take any
responsibility if you lose all the parameters of setting or cannot connect to your VoIP service provider.
FACTORY RESET
There are two (2) methods to reset your unit:

Reset Button

Reset default factory settings following these four (4) steps:
1. Unplug the Ethernet cable.
2. Locate a needle-sized RESET hole on the back panel of the camera above the power jack.
3. Insert a pin in this hole, press and hold for about 30 seconds till reboot
4. Take out the pin. All settings are now restored back to factory default settings.
Grandstream Networks, Inc.
D S
EFAULT ETTING
GXV3615 User Manual
Firmware Version 1.0.4.38
Page 36 of 37
Last Updated: 03/2013