Figure 4-2: Video & Audio Settings Page
•
Primary Stream Settings:
o Preferred Video Codec:
o Resolution:
o Bit Rate:
o Max. Frame Rate:
o I-frame Interval:
•
Secondary Stream Settings:
NOTE:
H.264 suggested if camera needs to be viewed via Internet.
If MJPEG selected, reduce fps to minimum to save bandwidth and get better image
Grandstream IP Camera provides two video streams, user can use them with flexibility. For example,
the high-resolution stream for local recording; another low or high resolution for remote monitoring or
Smartphone applications, or vice versa depending application scenarios.
Use below link to calculate bandwidth and storage before installation
http://www.grandstream.com/support/tools/bandwidth-storage-calc
Grandstream Networks, Inc.
MJPEG and H.264 supported, H.264 recommended.
The video resolution in pixel, Max. is D1 resolution
video bit rate used in video
The max. frame rate used
I-frame interval
Pull down to select, same as Primary steam..
GXV3615 User Manual
Firmware Version 1.0.4.38
Page 19 of 37
Last Updated: 03/2013