Appendix B Command Line Interface; Logging On To A Switch; User Accounts; B.1 Logging On To A Switch - Qlogic SANbox 1400 Series Installation Manual

The command line interface (CLI) enables you to perform a variety of fabric and
switch management tasks through an Ethernet connection. This section describes
the following:
B.1

Logging On to a Switch

To log on to a switch using Telnet, open a command line window on the
workstation and enter the Telnet command followed by the switch IP address:
A Telnet window opens prompting you for a login. Enter an account name and
password.
59225-00 B
Command Line Interface
Logging On to a Switch

User Accounts

Working with Switch Configurations
Commands
# telnet ip_address
Appendix B
B-1